Is the Dyness Tower T10 compatible with the Kostal PLENTICORE G3?
The Dyness Tower T10 is compatible with the Kostal PLENTICORE G3 over the RS485 protocol. Verified against the inverter manufacturer's official list — the document your warranty depends on — according to KOSTAL — Freigegebene Batterien für PLENTICORE (04/2026 (DOC02048988-0035), 1 abr 2026).
Pair sheet
Every documented field
What the sources say, with the gaps left visible: if a value is missing, we say so instead of filling it in.
| Status | VerifiedConfirmed against the inverter manufacturer's official list — the document your system warranty depends on. |
|---|---|
| Communication protocol | RS485 |
| Minimum inverter firmware | Not stated in the sources |
| Minimum BMS firmware | SW de batería ≥ V119, con controlador BDU1.5G obligatorio |
| Battery modules | Not stated in the sources |
| Battery voltage | High voltage (HV) · 10,66 kWh (10,13 kWh usable) |
| Inverter coupling | For high-voltage (HV) batteries · three-phase |
| Source region | Spain— check the list published for your own region before buying |
| Last verified | 3 jul 2026 |
| Source | KOSTAL — Freigegebene Batterien für PLENTICORE · 04/2026 (DOC02048988-0035) · 1 abr 2026 |
| Notes | Confirmada por las DOS listas oficiales: KOSTAL (04/2026) aprueba la Dyness Tower T7-T21 (incluida la T10) con el PLENTICORE G3, y la Dyness Tower Series Compatibility List (09-10-2025) marca el PLENTICORE G3 en toda la gama Tower. Condición crítica de KOSTAL: solo se aprueba la Tower con el controlador de batería BDU1.5G y software de batería V119 o superior. Comunicación RS485 (X601). Sin operación en paralelo. Requiere un contador KOSTAL aprobado. |
Keep exploring
Related combinations
Other batteries documented with the Kostal PLENTICORE G3
- BYD Battery-Box Premium HVS 7.7Verified
- BYD Battery-Box Premium HVM 11.0Verified
Other inverters documented with the Dyness Tower T10
- Sungrow SH5.0RSNot listed
- GoodWe GW5K-ETIncompatible
About this data
Vatio is an independent Spanish comparator. We do not sell batteries or inverters, and no manufacturer pays for placement here — every verdict is traceable to the manufacturer’s own document, with its version and date shown above. Our installer quotes are Spain-only, which is why you will not find a sales pitch on this page. The compatibility itself is universal: a Kostal PLENTICORE G3 behaves the same wherever it is installed. Ver esta ficha en español →